Lg Dryer Cooling Light Stays On. You can reset lg dryer by following these steps: Make sure that the washer or dryer is powered on.
LG Electronics 7.4 cu. ft. Electric Dryer with Steam in from www.homedepot.com
Touch and hold the relevant shared drum light button for 3 seconds. Learn how to troubleshoot this issue. The dryer heated up , but only to 110 degrees and the cooling light stayed on.
Usually, The Dryer Display Will Show The Code Cl If The Child Lock Setting Is On.
The drum light will illuminate to increase energy efficiency this light will automatically turn off after 4 minutes. I changed the thermister and sensor bars (cheap, so why not), no change. If that light begins blinking shortly after starting the dryer in an automatic moisture sensing cycle then you could have a problem with the moisture sensing circuit.
Lg Dryer Troubleshooting Steps When There Is No Heat
Turn power off and unplug the dryer 2. Before troubleshooting your dryer, make sure to unplug the dryer so you can safely check the fuse. However, after the cycle reaches the last five minutes, the cooling light will start to flash on and off.
My Dryer Only Displays Cooling During The Last 10 Minutes Of Drying.
Vocational, technical or trade scho. Touch and hold the relevant shared drum light button for 3 seconds. When it's running, the cooling light at the top is on and the drying light blinks.
The Light Comes On Every Time The Dryer Is Started, As A Reminder To Clean Out The Lint Filter.
You can turn off energy saver mode each time you use the dryer by pressing the energy saver button. The cooling light and the heating light come on at the same time. My lg gas dryer, model tromm dlg2524w does not heat.
Please Request A Repair If The Problem Persists.
To prevent accidents or injury, the child lock setting disables all dryer functions. Use a screwdriver to remove the access panel disconnect wires from fuse. Plug the dryer back in.
